New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Sept 8, 2013 13:21:35 GMT -5
|
Post by superonionknight12 on Sept 26, 2013 20:18:58 GMT -5
I purchased a set of 8mm mirrors that have integrated turn signals in them. My scooter's wiring harness has two connections (blue, orange, and then green for ground) to the turn signals, but the wiring from the mirrors to my connectors is too short. Is there any wiring extension I could purchase that any one knows about? I would prefer to not cut wires if that's possible. If not, I do have two extra stand alone turn signals, but I was having trouble mounting them on my scooter. The mounting of the mirrors seems stable enough; just the wiring is giving me the issues.
150cc GY6 air-cooled 4-stroke
|
|
|
|
Post by ltdhpp on Sept 26, 2013 20:45:52 GMT -5
Does it use banana plugs? They work with the ones you can find at stores, you could just make your own extensions.
|
|
|
|
Post by scootnwinn on Sept 26, 2013 21:05:46 GMT -5
DX yep it's pretty easy to do
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Sept 8, 2013 13:21:35 GMT -5
|
Post by superonionknight12 on Sept 30, 2013 12:13:26 GMT -5
Thank you both for your responses. I'm not familiar with electrical terminology, but with a little help from google and my eyesight, I believe I have banana plug type connections. I also remember there being a tiny electrical wiring isle at Walmart that I'll check out while bringing the integrated turn signal. Here are photos of my connector/connections if I'm wrong. s876.photobucket.com/user/rtkrupka/slideshow/Scooter%20WiringI'll make a quick trip to Walmart and check it out to see if there are extensions. |
|
|
|
Post by scootnwinn on Sept 30, 2013 13:16:30 GMT -5
you have 2 types blade and bullet. Banana's are usually only used for audio...
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 1:20:07 GMT -5
|
Post by Deleted on Sept 30, 2013 15:43:54 GMT -5
Advance has those mael and female connectors
|
|
New Rider
Currently Offline
Posts: 34
Likes: 0
Joined: Apr 30, 2013 7:28:58 GMT -5
|
Post by beerkeg on Oct 3, 2013 10:02:25 GMT -5
I am considering mirrors like this for my BMS BiMetro110 because it has a very small and short throw signal switch that I either over throw or forget to cancel. I'd like mirrors that are tall enough to be visible in the corner of my vision and have a rear facing blinker so I can easily be aware that the signal is still blinking. It has a beeper which I cannot hear in traffic so it's useless. So far I have not found just the right set. Self cancelling signals would be a nice feature. I've had the bike for while now and just discovered the steering lock down by the fork which is not mentioned in the user manual.
|
|
