|
|
Post by millsc on Sept 16, 2013 10:26:18 GMT -5
I have a used top end for a 150cc cam head piston kit and all i took off mine at 3 miles
|
|
|
|
Post by SylvreKat on Sept 16, 2013 22:42:07 GMT -5
I'd for sure not take it back to that shop to have them rebuild the engine. Or maybe so--since they couldn't fix the problem, and since they charged you $400 to not fix the problem, see if they'll replace or rebuild the engine for their cost of parts only. Worth a try, they might just say sure why not.
>'Kat
|
|
|
|
Post by alleyoop on Sept 16, 2013 23:17:42 GMT -5
I think people are jumping the gun here a few simple test will determine if the motor needs a rebuild or not.
1. First check the valves, and adjust them both to .004 inchs and this time check the timing.
2. Check the compression of the motor.. If the Compression is close to 150psi then motor is good.
But if you have deep pockets then by all means get a new motor, but if not do those simple tests I mentioned and get back with the results.
Alleyoop
|
|
New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: Aug 22, 2013 10:00:09 GMT -5
|
Post by rickhun on Sept 19, 2013 14:21:21 GMT -5
will check compression first,then valves, thank u for the info
|
|
..BAD TO THE BONE..
