Freshman Rider
Currently Offline
Posts: 51
Likes: 0
Joined: Mar 3, 2013 20:16:25 GMT -5
|
Post by T150 on Sept 12, 2013 17:00:19 GMT -5
[replyingto=chanoarg]chanoarg[/replyingto]Yes you should replace the gaskets. You can get the engine number from under the cvt area and find gasket kit for it. Do some research on which kit you need. Yes replace the gasket for the exhaust. It is not fun after waiting for parts, then realizing they are wrong. It helps to take it apart, measure, then order parts.
|
|
|
|
Post by tvnacman on Sept 12, 2013 19:25:11 GMT -5
I think this is what you need , www.testedscooterparts.com/product_info.php?products_id=10563068The only thing I would upgrade is the exaust gasket  that gasket is more forgiving than the stock round one . The stock round one is a one time use once you bolt it together , if you open it then you can not reuse it . The oval one you can reuse it . John |
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Sept 11, 2013 8:56:32 GMT -5
|
Post by chanoarg on Sept 14, 2013 12:29:42 GMT -5
Thank you guys for the responses. I accidentally deleted my original post so I'm really sorry about that. here it is in case anyone wants to see it: Hey guys, my name is Luciano and I am new to the scooting community and also this forum. I am a handy person but when it comes to mechanics I am not very knowledgeable. What I mean by that is that I am able to preform the tasks but not able to diagnose them. That's why I'm here ;D, for your expertise. Ok so I bought a Zhongneng Znen Lance Milan 150 (ZN150T-F) on craigslist about 3 days ago. (will post picture below) - My issue at the moment is that there are leaks happening, They are happening below the head of the motor and then the second part after the head (this is what I meant when I am not knowledgeable). It is the second part after the head. - I think that to fix these leaks all I need to do is just install new gaskets and I'll be good to go. Is that correct? - My second issue is also which i assume is a gasket issue has to do with the exhaust where it attaches to the engine. When I bought the scooter it apparently did not have screws on the engine to the exhaust, stupid, i know. So I went ahead and screwed on some locking nuts and nuts to it to secure it. I still think that there is exhaust coming out. - Do you guys think I should add a gasket to the part where the exhaust meets the engine? LAST QUESTION I promise. So I was looking to buy gaskets and I landed on this page: www.replacementscooterparts.com/web_gas/GY6_Gaskets_set.htm- If i needed to replace my gaskets, would this be good? - And which type of case do I have long case or short case version? Okay sorry for all the questions but it seems like you guys know what you are doing so might as well go ahead and ask  . |
|
