|
|
Post by doublert on Aug 31, 2013 22:11:13 GMT -5
What psi do you torque the rocker box bolts too?
|
|
|
|
Post by tvnacman on Aug 31, 2013 22:17:03 GMT -5
when I did it I THINK 17-20 , I would have to go back and dig around to tell you for sure .
John
|
|
|
|
Post by scootnwinn on Aug 31, 2013 22:22:55 GMT -5
That's 17-20 foot pounds not psi right?
|
|
|
|
Post by tvnacman on Aug 31, 2013 22:25:57 GMT -5
That's 17-20 foot pounds not psi right? was that for me ? and yes ft lbs . John |
|
|
|
Post by scootnwinn on Aug 31, 2013 22:35:28 GMT -5
Just for general clarity the OP asked for specs on the wrong way wanted to make sure everyone knew you were answering with the appropriate value in a usable form...
|
|
|
|
Post by doublert on Aug 31, 2013 23:48:43 GMT -5
Just for general clarity the OP asked for specs on the wrong way wanted to make sure everyone knew you were answering with the appropriate value in a usable form... Sorry, my brother torqued his to 180psi broke part of the mount, which im guessing he thought lbs. he got confused. He got the info from the old site scootdawg. He broke part of the rocker arm box from torqing it down that tight. I'll be sure to tell him 17-20 lbs foot pounds..... Thanks, Randy |
|
|
|
Post by sailracer on Sept 1, 2013 4:11:01 GMT -5
most specs I've seen say 15 ft/lb. those are the head bolts
|
|
jet