New Rider
Currently Offline
Posts: 37
Likes: 0
Joined: Jul 1, 2013 20:13:55 GMT -5
|
Post by ronnoc923 on Aug 8, 2013 22:51:14 GMT -5
Do you guys think it would be possible to change a oil mix engine into a oil injection engine? If so what do you think it would require? Could I just get a seat with the oil tank inside of it to lead down into the carburetor? Or do I need to have some kind of vacuum system to suck only a certain amount of oil to the carburetor?
Whats everyone's thoughts on this?
I have a 1987 Tomos A3 Bullet TT
|
|
|
|
Post by skuttadawg on Aug 8, 2013 23:28:25 GMT -5
Would need an oil tank , the pump , a carb with oil line inlet and a diff throttle cable . I had Tomos mopeds a Bullet , Silver Bullet and Golden Bullet which had oil injection as the other two were premix of 50to1 . Never had a single issue on premix but the pump fizzled on the GB so I unhooked the lines and premixed . I did not find an oil pump but Im sure somebody has one that will work but I did find engine kits and exhausts for Tomos here www.mhr-usa.com/index.php?target=mopeds&mode=mopeds_search&subcats=Y&cid=0&moped_brand_id=134&moped_model_id= |
|
Freshman Rider
Currently Offline
Posts: 89
Likes: 1
Joined: Jul 14, 2013 22:03:15 GMT -5
|
Post by geo49 on Aug 11, 2013 19:24:30 GMT -5
Better off staying pre-mix.
oil pumps can fail and pre-mix can't.
|
|
New Rider
Currently Offline
Posts: 26
Likes: 0
Joined: Aug 11, 2013 18:11:51 GMT -5
|
Post by westendscooters on Aug 11, 2013 21:43:35 GMT -5
Agree with Geo... Had 2 smokers in the past, and always had problems with the oil pump failing. Not fun to replace a top end because of a little pump -.-
|
|
