Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 13, 2013 16:22:19 GMT -5
I'm looking into placing a big order for the scoot soon, i am just wondering what size rollers, and jets i should get. I have a 2011 Peace Sports 50, gy6 150 coil &Cdi, performance pipe and just a piece of cloth over the carb for a temp air filter, and a ngk iridium cr7hix plug.
So what size:
-rollers
-sliders
-jets should i get
The engine is a qmb139
Thanks, Ryan.
|
|
|
|
Post by lykos23 on Jun 13, 2013 16:26:29 GMT -5
With a performance filter try 78 through  jets. 7g sliders or 6g rollers are a good starting point for weights, but your best option is to get a weight tuning kit from here: www.scooterworks.com/prima-roller-weight-tuning-kit--16x13--3g-to-14g--products-1935.php#.Ubo4wU1jg3E Sliders > Rollers imho. (The tuning kit rollers are not designed for every day use, they are temporary weights designed for fine tuning your specific weight needs which varies from scooter to scooter and person to person) It's 38mm for the filter if you don't already know. Don't forget the filter oil like I just did.  |
|
Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 13, 2013 21:27:53 GMT -5
Haha, no i know about the oiling of the air filter.
Should i not change the idle jet?
Thanks, Ryan.
|
|
|
|
Post by lykos23 on Jun 13, 2013 21:32:19 GMT -5
[replyingto=ryaanlx]ryaanlx[/replyingto]The idle jet should be good up to 150cc, if you would like you can purchase a longer #35 jet, but otherwise it is not necessary to up the idle jet unless you up the displacement of your scooter.
|
|
Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 13, 2013 23:54:36 GMT -5
You think a gy6 150cc would work instead of getting jets?
|
|
jets. 7g sliders or 6g rollers are a good starting point for weights, but your best option is to get a weight tuning kit from here:
Main Jet