Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 10, 2013 21:52:01 GMT -5
Just finishing my scooter and i ran into a problem. i have no lights electric start, or any other electronics... But will start and drive, what am I doing wrong?
|
|
Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 10, 2013 23:31:38 GMT -5
Anyone?
|
|
Sophomore Rider
Currently Offline
Posts: 114
Likes: 0
Joined: Feb 24, 2013 10:04:01 GMT -5
|
Post by dude on Jun 10, 2013 23:35:40 GMT -5
Fuse??
|
|
Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 10, 2013 23:41:52 GMT -5
Fuse is good, I started to hard wire the head lights to the battery with a switch. But I still won't have electric start, gunna have to keep kicking it until I solve this.
|
|
|
|
Post by alleyoop on Jun 10, 2013 23:52:53 GMT -5
Your Key gets 12v from the battery, that is the wire with the fuse on it. When you turn the key on it sends voltage to the switchs and the BRAKE SWITCH which IN TURN WHEN SQUEEZED works your STOP LIGHT AND AT THE SAME TIME SENDS VOLTAGE TO THE SOLENOID which one TERMINAL goes to your starter. The other TERMINAL on the SOLENOID is connected to the POSITVE POST on the BATTERY. You also have to have a ground wire from the battery to the FRAME.
Alleyoop
|
|
..BAD TO THE BONE..