Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 10, 2013 18:19:35 GMT -5
hey if i took a honda and tried to plug it into a razz starter, would it turn? or what?
|
|
|
Post by alleyoop on Jun 10, 2013 20:50:17 GMT -5
Sure it would turn the crank being a HONDA does not mean it has over 200psi that you would not be able to kick it over.
What kind of kickstarter does it currently have on it now? Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 10, 2013 21:49:11 GMT -5
if i put the razz... ah. i dont think the yamaha would, work. even though they both look the same. same size. my kickstarters messed up and my starter died like a battery died in a gameboy.
think i might of burned it out. but i dont know. pretty srue, it was really worn. and it made a dead battery sound. like i killed the starter. the lawnmower after that, started up. ehh. wait, it was running. and i had a full face helmet on. when this happenned. it now just, ticks. and the box on top when my batery died, makes the same tinking sound and the wire jerks. if you hold it. it .. ticks,.. thru it. like it pings it. but no starter. dead battery on my scooter.
|
|
|
Post by alleyoop on Jun 10, 2013 22:05:43 GMT -5
If it clicks when hitting the start button, try jumping the 2 solenoid terminals. If it spins your starter your SOLENOID is bad. If it still clicks jumping the SOLENOID then your battery is shot. Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 11, 2013 15:18:33 GMT -5
ok. so i took the starter apart. it was spinning with no resistance when i got it apart. quick. so i messed with them springs. and put it back together and pushed on the plastic clip. then the starter was hard to sp9in and i was like, itll make power. so back together. started spinning when i hit the start button. finally started, slowly turning it. like a real bad dead battery, but it just kept going. then i noticed smoke fro the relay. i quit. and unplugged it.
what is wrong? bad relay starter? the springs are like on plastic clips, they push on things that push agasint he spinning thing at the bottom. they seemed, thick?
|
|
|
Post by alleyoop on Jun 11, 2013 16:31:51 GMT -5
Bad starter bud, get yourself a new starter. Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 12, 2013 1:20:11 GMT -5
is it scrrrewed? worthless people with local shops need to look. i need to know so i can look, then id know and be able to fix it myself later if it messes up again.
but it ran real slowly like a really dead battery, but it wasnt.
so, theres no fixing? whats burnt? the guy on the phoe said something, like, odometer> i couldnt hear him? so. nothing to replace? really? its shot? ever gotten one of them eastern tennessee dc electric starters?
|
|
|
Post by alleyoop on Jun 12, 2013 1:33:50 GMT -5
Well you can try cleaning the brushes and the armature up and see if it then works. But if you smell it and it smells burnt then it may be the wires are burnt and are creating a lot of resistance.
instead of a razor blade I would use a fine sandpaper and grab it with your hand and rotate it. Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 12, 2013 1:46:00 GMT -5
do you understand what im saying? i said it spun.
is that thing thre, going to fix that? cuase its a bad worn out starter too? should i just throw it away? or does that thing fix it? i thoguht there was a way to rebuild astarter missing. why does it turn slow?
it spun, the starter, does that. it misses. and that fix, does that fix that? and alright. but it misses a lot and is that how yo8u fix that? its pretty gone. takes a while turning it. it might of burnit it out whatever it is. just wondeinrg what burns that out? yea mine was pretty black, looking. i forget how yo8u clean them. i heard. oh 2000 grit sandpaper?
how do i know when the, one things, the plastic little rubbing, things, are bad? these looked about as logn as they are wide. there honda.
would a yamaha's .. uh. uhmm. .. UM them thigns. motor, brushes. yea. froma yamaha work on them? also they look like a dremels, i bought a set. but theyd have to be the same size? too right? hehe. where do you get motor brushes, just any?
|
|
|
Post by alleyoop on Jun 12, 2013 1:52:35 GMT -5
It spinned but slow and something started to smoke(which is caused by something causing a lot of resistance and getting really hot). So clean it and if it still does not work right pitch it in the garbage and get a new one. Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 92
Likes: 0
Joined: May 31, 2013 22:01:37 GMT -5
|
Post by mileage on Jun 12, 2013 1:54:33 GMT -5
ya. hey i updated my post.
uhm does the spinning, though, where it misses, is it fixed by that? i think its what burnt it out. when i first took it apart and put it back together, it was just spinning, that gear fast. then it caught, and went realll slowly. not grinding good like before. like a dead battery. and how about teh brushes. its a honda. there as long as they are wide? are they supposed, to .. be shiny? i havent really looked. yet. will this fix the spinning?
|
|