New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: May 31, 2013 21:12:10 GMT -5
|
Post by originalitykills on May 31, 2013 21:15:54 GMT -5
Hello my name is Zack and i recently purchased a 250RR.
there are Plenty of things i would like to do but The man i bought it from did not provide a Manual..
i would like to know how to replace the back Drum brake pads as well as the Front pads.
also i would like to learn how to replace parts as well as change the oil and gear oil...
If anyone could help me with obtaining a Manual or Expertize on how to change or fix these parts and a Good website that sells Moped/scooter parts for the moped i have that would be awesome.... Thanks very much for your time
|
|
Sophomore Rider
Currently Offline
Commuting is the best part of my day!
Posts: 213
Likes: 14
Joined: Feb 26, 2013 7:56:23 GMT -5
|
Post by trailheadmike on May 31, 2013 23:08:41 GMT -5
Is that the 244cc helix clone engine? If so, this manual might help (for the engine). www.mediafire.com/view/?f7nqc1qv97uife7If it has the linhai clone engine (257cc) you can find and download the Yamaha YP250 manual on line somewhere. pm me if you can't find it - i have it as a pdf i can email to you. |
|
New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: May 31, 2013 21:12:10 GMT -5
|
Post by originalitykills on Jun 1, 2013 1:03:47 GMT -5
honestly man i don't have any idea about moped motors or how to fix my moped or anything... that's why i joined this web site in hopes to get some more general knowledge and know how... but if you check this website out this is exactly the moped i have but it just says its made by road runner evosales.com/pd-250-touring-scooter.cfmbut i know the back breaks are worn out and the front pads are worn down as well... and it makes this crazy screeching noise sometimes im not sure if its because of the back brakes or the gear box?  so im trying to figure out how to replace everything... and could anyone SUPPLY me with a good website to buy the PROPER parts for my moped as well please and thank you |
|
New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: May 31, 2013 21:12:10 GMT -5
|
Post by originalitykills on Jun 1, 2013 8:38:54 GMT -5
so i have seen that alot of people have read my post but yet i get no replys??? no one is willing to help me out? everyone is new at something in there lives at some point... im trying to learn, but with no help that is impossible.... Thanks again
|
|
|
|
Post by spandi on Jun 1, 2013 8:51:33 GMT -5
|
|
|
|
Post by spandi on Jun 1, 2013 8:59:55 GMT -5
|
|
Sophomore Rider
Currently Offline
Commuting is the best part of my day!
Posts: 213
Likes: 14
Joined: Feb 26, 2013 7:56:23 GMT -5
|
Post by trailheadmike on Jun 1, 2013 9:08:46 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 52
Likes: 5
Joined: Jun 2, 2013 10:34:28 GMT -5
|
Post by mouse0667 on Jun 2, 2013 17:38:26 GMT -5
[replyingto=trailheadmike]trailheadmike[/replyingto] TrailHead, what year is that manual? I have a 2007 Duke Touring 250 and see some differences. No kick start on mine but basically the same. As far as service goes from what I can see is to find the motor in your bike because they all clone each other. Then find a service manual for that motor.
|
|
|
|
Post by spandi on Jun 3, 2013 1:24:57 GMT -5
More than likely the 244cc Honda Helix clone.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Jun 3, 2013 4:28:13 GMT -5
|
|
|
|
Post by spandi on Jun 3, 2013 9:12:25 GMT -5
I've found that a lot of parts marked as "model specific" are in fact generic "off the shelf" stuff that goes on a variety of models.
|
|
New Rider
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2013 13:34:27 GMT -5
|
Post by bjg on Jun 7, 2013 14:19:30 GMT -5
I have a 2009 250cc Roadrunner and the closest manual I've found for it is for the Yamaha YP250. That manual is available for download in the manuals section on this site (click home and then go to the tech infomation center section and choose manuals->service manuals). Make sure you are logged in or you wont see it. There are youtube videos out there for nearly anything you want to do to your scooter. Watch several before you try anything because (1) you will learn different tips and tricks from each and (2) not all of them are good. As long as you have a little mechanical aptitude you should be able to get what you need between the manual and the videos. www.iscooterparts.com/ will have some OEM parts for your scooter including body panels. They arent the cheapest but its a start. |
|
New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: May 31, 2013 21:12:10 GMT -5
|
Post by originalitykills on Jun 8, 2013 5:43:23 GMT -5
Thank you very much for everyones input.. and thank you BJG..... my question for you is!??!?!?!? Have you ever ordered from iscooterparts? i seen this website and have been wondering if they are trust worthy?
|
|
|
|
Post by spandi on Jun 8, 2013 6:15:04 GMT -5
You are quite welcome....it's about time you had some good luck with this!  |
|
New Rider
Currently Offline
Posts: 23
Likes: 0
Joined: May 31, 2013 21:12:10 GMT -5
|
Post by originalitykills on Jun 8, 2013 7:08:53 GMT -5
you didn't answer my question tho? Is the website you mentioned "TRUSTWORTHY?" |
|
