New Rider
Currently Offline
Posts: 22
Likes: 0
Joined: Apr 7, 2013 0:53:21 GMT -5
|
Post by Ronan on May 30, 2013 14:47:30 GMT -5
Hello, I am in a fortunate position right now to get a Kymco agility 50 2009 for ~$700 and would like to take advantage of the situation. I would like to drop in a 150cc GY6 engine into it. From what I have read the agility 50 frame is almost identical to the agility 150 frame. Would this be an issue to just take out 50 engine and put in the 150 engine or would I have to bore my own holes and make additions to secure the 150 engine?
Any advice is appreciated, thanks!
|
|
|
|
Post by hank on May 30, 2013 14:52:59 GMT -5
Hi
You would need to fabricate and weld new mounts, its not a drop in and bolt up
If you have the mechanical aptitude and good welding skills its fairly easy
Take care and ride safely
Yours Hank
|
|
New Rider
Currently Offline
Posts: 22
Likes: 0
Joined: Apr 7, 2013 0:53:21 GMT -5
|
Post by Ronan on May 30, 2013 16:18:25 GMT -5
Hi You would need to fabricate and weld new mounts, its not a drop in and bolt up If you have the mechanical aptitude and good welding skills its fairly easy Take care and ride safely Yours Hank Ok, thanks. It shouldn't be that much trouble as I have somebody that could do the welding for me. |
|
