Freshman Rider
Currently Offline
Posts: 70
Likes: 0
Joined: Apr 24, 2013 16:58:15 GMT -5
|
Post by justputtnaround on May 27, 2013 18:27:50 GMT -5
I have a taotao 150 as my daily rider I have been wanting to up the Carb jets. But I would have to drill out the exiesting studs to get to my jets. Put new bolts in. What down falls if any other then increased fuel consumption.if I was to upgrade to a 30 mm Carb then put my free flow intake on?? Or would I end up unsatisfied and out $80 more??
|
|
|
|
Post by alleyoop on May 27, 2013 18:55:20 GMT -5
You will be battling to get it to run right, to much fuel and air with a 30mm carb. You will have to change the jets to a smaller size on the 30mm and even then because of the larger Venturi it sucks in a lot of air.
Just either get an aftermarket 24mm carb which are not plugged or unplug your current one.
Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 70
Likes: 0
Joined: Apr 24, 2013 16:58:15 GMT -5
|
Post by justputtnaround on May 27, 2013 19:03:36 GMT -5
That's why I like having this forum around good advice to keep money in my pocket
|
|
..BAD TO THE BONE..