New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: May 27, 2013 15:14:45 GMT -5
|
Post by shipscoot on May 27, 2013 15:38:12 GMT -5
sorry image wont load. Ill explain. It is on top of my GY6 150 cc cylinder (facing skyward). It sits near the intake manifold, has two 8mm hex bolts that hold it on to the cylinder wall. It has one flat head set screw that is recessed about half an inch down. On mine it has a little blow by that is leaking (blowing) oil. Can anyone help.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: May 27, 2013 15:14:45 GMT -5
|
Post by shipscoot on May 27, 2013 15:59:34 GMT -5
I Got It! it is the tensioner for the timing chain. The crew that covers it was missing. Next question is..... Should I just throw a screw with an o ring on it or are there parts missing (spring maybe)
|
|
|
|
Post by alleyoop on May 27, 2013 16:05:21 GMT -5
Yes it is your cam chain tensioner and it is missing the O-ring and Screw: So take it all off and take it to the hardward store and get a SHORT screw and a O-ring that will fit. They do not sell those parts seperately. Alleyoop  |
|
..BAD TO THE BONE..