New Rider
Currently Offline
Posts: 24
Likes: 0
Joined: May 16, 2013 20:09:47 GMT -5
|
Post by joshm on May 24, 2013 22:59:46 GMT -5
I cannot for the life of me find those two dang bolts that go from the muffler to the frame of the scooter? Are they a common bolt I could just pick up at a hardware store? They're the only things keeping me from riding! Ugh! Please and thank you  |
|
New Rider
Currently Offline
Posts: 24
Likes: 0
Joined: May 16, 2013 20:09:47 GMT -5
|
Post by joshm on May 24, 2013 23:04:28 GMT -5
Hopefully a picture will help :  |
|
|
|
Post by skuttadawg on May 24, 2013 23:26:20 GMT -5
M8-1.25 X xxmm . The xxmm is the length . I had mine fall out so I went to Oreilys and bought some after measuring with a caliper . I used washers and torqued em tight and they stayed in so far . My MMG pipe the bracket was much thinner so I had to use several washers behind it to keep from having it scrub the rear wheel and used a single washer on the front side
|
|
New Rider
Currently Offline
Posts: 24
Likes: 0
Joined: May 16, 2013 20:09:47 GMT -5
|
Post by joshm on May 24, 2013 23:28:30 GMT -5
Thank you very very much for the info. I'm glad to hear it's a common size. I'll measure the length in the morning.  |
|
|
|
Post by skuttadawg on May 24, 2013 23:43:03 GMT -5
With any two wheeler it is common for bolts , nuts and screws to get loose , so every so often go over them with a wrench to make sure all is snug tight . The lines on the head tell how strong is it the more lines the stronger the bolt is
|
|
