Freshman Rider
Currently Offline
[F4:http://www.face]
Posts: 84
Likes: 0
Joined: Mar 20, 2013 22:20:39 GMT -5
|
Post by armydog2010 on May 21, 2013 22:47:53 GMT -5
so wile trying to tune my carb and going left and right. i somehow managed to strip my idle adjustment screw that goes of the left side of my carb and adjust the wheel that the throttle cable is attached to. any ways. i cant find a replacement. any one know where i can find one? thanks
|
|
Freshman Rider
Currently Offline
[F4:http://www.face]
Posts: 84
Likes: 0
Joined: Mar 20, 2013 22:20:39 GMT -5
|
Post by armydog2010 on May 21, 2013 22:49:07 GMT -5
also known as idle speed screw is what i beleave the actual term is
|
|
|
|
Post by alleyoop on May 21, 2013 23:12:47 GMT -5
Where the throttle cable is that is the RIGHT SIDE as you sit on the scoot left and right, just like in a car.
How in the world did you manage to strip that screw? If you had to screw that screw all the way in to raise the idle you have something wrong. It only takes about 1/16 t 1/8 clockwise turn to raise the idle pretty high.
Alleyoop
|
|
Freshman Rider
Currently Offline
[F4:http://www.face]
Posts: 84
Likes: 0
Joined: Mar 20, 2013 22:20:39 GMT -5
|
Post by armydog2010 on May 22, 2013 6:20:58 GMT -5
I purchased the scooter from a title pawn shop here in GA. The guy that owned it before me was a retard. It was laid down. There was a fuel pump for 4,6,8 cylander platforms. He removed the shock that hold the seat up. Removed the light that was under the seat. Had a lawn and harden battery Installed. The idle screw was all the way in. When I backed it out. Once it hit about half way on the threads it poped out. Looked and that much thread on it was striped. This bike has had alot of problems as u can tell. But that's what u get when u buy it for $640.
|
|
Freshman Rider
Currently Offline
[F4:http://www.face]
Posts: 84
Likes: 0
Joined: Mar 20, 2013 22:20:39 GMT -5
|
Post by armydog2010 on May 22, 2013 14:28:58 GMT -5
So be ideas on an idle speed screw
|
|
..BAD TO THE BONE..