Geely  By  k0n0w (Read 448 times)

Hello, Im new to the forums and new to mopeds as well. Iv been having some problems with my new ped and was hoping someone could help. I recently purchased a used Geely jl50qt-16 hoping to get it running and ride around for bit, before selling to fund a bigger project of mine. The previous owner said it had just been sitting for a while and was in working cond. when parked. First thing I did was drain the fluids, and clean the carb. Then inspected the reed valves(reeds were spotless) and changed the plug(also checked for spark). There seems to be a hole where the kick start use to be so I hooked up a battery and cranked it over(using a little starting fluid). It spins very very slow, iv cleaned the starter and looked for any potential signs of binding in the starter mech., but nothing. Every once in a while it will cough as if it wants to start, but i believe it wont start because its not being spun fast enough. Any ideas?

Also the piston and sleeve look brand new aside from a little carbon build up on the head of piston and has great compression(will be able to get comp #s tomm). The cooling head has 86cm3 and the word "niole" on it, strange for a 50cc.......

One last thing, some parts from the oil injection system were in pretty rough shape and could not be saved, I would like to run mix so this is not a huge problem to me but now I am confused where to put my gas line in the carb seeing that there are three inputs....


Thanks for reading, help would be greatly appreciated.
-Chris