Post by ldawgsimmons on Jul 16, 2022 4:51:33 GMT -5
So for three days now I have been trying to get my 2012 taotao 150 to stop shooting flames out exhaust. I have checked timing (top dead center) adjusted valves. Only thing I haven't done is turn air fuel mixture screw cause it has a block on it. Gonna try and drill outta remove so I can adjust. I also checked that muffler is tightly attached to head. I am at the end of patience road. Can someone please give me some info on what it could be. 5200 miles on dometer. It runs 70 mph fine but will shoot flames even while idling and turns pipe glowing red. I dunno
May have an issue with the exhaust valve not fully closing . I'd expect a loss of power though. Your exhaust valve" if not closing completely " let flames pass out the exhaust during every igition stroke.
63mm bbk 61mm head with roller rockers Taida clutch and varistor 15 gram rollers High flow oil pump Taida high torque starter 18:36 final drive gears Oil cooler with oil temp gauge 30mm flatside carb 125 main jet So far 81mph on the interstate