New Rider
Currently Offline
Posts: 2 
Likes: 0
Joined: Sept 13, 2020 23:47:59 GMT -5
|
Post by im2fast4you623 on Sept 14, 2020 0:00:14 GMT -5
just got a 2015 znen 50cc scooter and I couldn't get spark so I bought new stator, ignition coil, CDI box,and spark plug and still no spark I matched up the stator that was in it when I got it 4 wire 8 coil and after installing it I plugged in the plug and I noticed on the harness side the plug also has a green wire and on stator plug there is nothing there I looked it up and found out that it is a ground so I grounded it but still no spark please help want to ride
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Jan 4, 2021 18:53:51 GMT -5
|
Post by jack on Jan 4, 2021 22:02:10 GMT -5
Hello, I don’t know if you have figured this out yet, but I would almost bet either your cdi box or coil isn’t grounded well. I would run a ground to both, if that doesn’t work use a small screwdriver and take out the black and white wire from the cdi box. If it starts then you can shut it off with the key or, if you are like me and haven’t bought one with a key yet. All you have to do is refasten the black and white wire into the cdi plug. Then cut the black and white wire and run each end to a switch, flip it and the scooter shuts off. (Also harder to steal). Hope it helps.
|
|
