Post by bobby17772 on Jul 13, 2020 19:33:03 GMT -5
Hey guys, it's been a long time since I've had to fix my scooter but it died on my last week and I think it may be the stator. It wasn't charging the battery at all and I was riding and it felt fine and then out of no where it was way down on power, made it another few miles and when I came to a stop it just died and I couldn't get it started again. I changed the cdi and coil and still no change so I think it's the stator.
I ordered one and of course the 3 pin connector was wrong...also ordered a 6 pole instead of a 8 pole...so my bad on that one. The ones that I found that have the same 3 pin plug only have the yellow and white wires and no green. So my question is what would happen if I put a stator in that doesn't have the ground/green wire? Will it work like normal or what?
Thank you
I ordered one and of course the 3 pin connector was wrong...also ordered a 6 pole instead of a 8 pole...so my bad on that one. The ones that I found that have the same 3 pin plug only have the yellow and white wires and no green. So my question is what would happen if I put a stator in that doesn't have the ground/green wire? Will it work like normal or what?
Thank you
