New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Aug 25, 2019 23:42:52 GMT -5
|
Post by tuttlemon on Aug 25, 2019 23:52:21 GMT -5
I’m buying a Lance Vintage 150cc from a guy that recently wrecked it and doesn’t have time to mess with it. I can find the simple mechanical issues that got broke, but I can’t find the front plastics. I’ve also learned a BMS Heritage is basically the same thing. Not sure of any other copies to research. I did find some plastics direct from BMS, but they are kits that involve allot of pieces I don’t need for like $400. I just need the front plastics around the handlebars/stem. The front looks like it wraps around and runs along the floorboards. Also, the piece around the knees/ignition. There is also a chrome trim piece around the rear bumper that’s damaged on one side, but it’s not that big of a deal, prolly just remove that.
Can anyone point me in the right direction to find what I need?
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Aug 25, 2019 23:42:52 GMT -5
|
Post by tuttlemon on Aug 25, 2019 23:53:17 GMT -5
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Aug 25, 2019 23:42:52 GMT -5
|
Post by tuttlemon on Aug 25, 2019 23:57:16 GMT -5
I’m new to scooters. I have a 50cc CSC GO that barely did 20flat when I got it, now I’ve tweaked it to achieve 35-40 flat. I’ve noticed all 50cc frames seem the exact same. From 50cc to the ones in the 100 ranges, the frame size gets larger, but again, same layout. I’m not hooked on the existing look/style of the scooter. I just like a clean, complete, and sharp scooter. I really despise the naked, wires and cables showing look that some enjoy. ANYWAYS, would it be true to think any plastics for a scooter model in the 100 ranges would mount up with this Lance Vintage frame?
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Aug 25, 2019 23:42:52 GMT -5
|
Post by tuttlemon on Aug 26, 2019 0:22:16 GMT -5
Further investigation: an Icebear PMZ150-5N Bullet 150, and a Paparazzi 150 seem to be the same body style.
|
|
|
|
Post by wheelbender6 on Sept 8, 2019 21:24:34 GMT -5
You are not being ignored, Tuttlemon. I think we just don't have any members that have owned a Lance from those years.
Some of the more recent Lances, with Adley engines, have turtle back bodies, but I don't think body panels will interchange with yours.
|
|
|
|
Post by w650 on Sept 9, 2019 10:53:46 GMT -5
Two people might be able to help you. Matt Maney at www.partsforscooters.com might know of a source. A longer shot might be Mike Hickman at Lance/Alliance Powersports. He may know where panels could be had since it was his company that sold it back then. You can email Lance with a note Att: Mike Hickman. |
|
