New Rider
Currently Offline
self emploied and getting ready to retire gonna buy me a motor home and a rack for my scooter
Posts: 1
Likes: 0
Joined: Aug 25, 2018 13:40:54 GMT -5
|
Post by copydocaz on Aug 25, 2018 13:58:22 GMT -5
HI guys (and gals) my name is Mark and I live in Chandler AZ. I need service and parts manuals for my scooter. It is a Shenke SL250-ss at least that's what it says on the bike. My friend gave me a Shenke 250 scooter when he had to move back east, It is a 2007 model and hasn't run in 10 years. I have done mechanical stuff all my life and it seemed like a fun project. So of course the battery was shot so I jumped it with my truck The motor turns over but won't start. so I remove the air cleaner and spry starter fluid in the carb and it runs as long as I spray soooo no fuel. I took all the body panels off and noticed all the rubber hoses are falling to pieces. the fuel line and filter are ok but there is no output from the fuel pump ? I guess it is vacume operated and the vacume line is not connected to any thing. I need a map of the vacume lines and fuel lines as they all need to be replaced. Also wheres the best place to get parts?
|
|
|
Post by tortoise on Aug 25, 2018 17:18:06 GMT -5
Based on images . . appears to have a 244 Helix clone engine . . floorboard level tank, so probably a pulse pump (in from tank-out to carb-vacuum line to intake manifold nipple). Roketa MAY be a potential parts resource (check discontinued products).
|
|
|
Post by wheelbender6 on Aug 25, 2018 17:34:04 GMT -5
Welcome to the forum. I lived in the east valley almost 15 years. I rode my motorized bike in AZ, since there were a lot of bike lanes. We got our scoots after moving to TX.
|
|
|
Post by chewbaca on Aug 26, 2018 11:55:16 GMT -5
one vacuum line to the carb one to the pump from a tee at the manifold that's it, not to complicated or you can get an electric pump 2 or 3 psi at the most
|
|