Post by 926am on Apr 27, 2018 16:07:34 GMT -5
My ‘not-that-stock’ cf250 has to have the throttle bliped to keep running when cold. I’ve switched to a manual choke but the problem has persisted.
It runs awesome when warmed up, plug is never fouled or baked. Valves have been adjusted as well as idle and fuel mixture. I was not able to find any vac leaks.
I have a k & n air filter and a performance stainless exhaust system. Jets are 130/38.
Could this just be a symptom of the mods?
Are there any components on the carb that I can inspect? (I’ve noticed a long rod in the fuel bowl area that seems to be integral to the choke/enricher circuit)
Sta-bil fuel additive is being used, could it be that? (Fuel is fresh)
Thoughts???
It runs awesome when warmed up, plug is never fouled or baked. Valves have been adjusted as well as idle and fuel mixture. I was not able to find any vac leaks.
I have a k & n air filter and a performance stainless exhaust system. Jets are 130/38.
Could this just be a symptom of the mods?
Are there any components on the carb that I can inspect? (I’ve noticed a long rod in the fuel bowl area that seems to be integral to the choke/enricher circuit)
Sta-bil fuel additive is being used, could it be that? (Fuel is fresh)
Thoughts???
