Freshman Rider
Currently Offline
Posts: 82 
Likes: 4
Joined: Mar 18, 2017 11:12:13 GMT -5
|
Pair system
by: 125scooterbro - Feb 4, 2018 6:06:43 GMT -5
via mobile
Post by 125scooterbro on Feb 4, 2018 6:06:43 GMT -5
Ay, anyone knows where the vent hose that comes from valve cover goes? Can i just connect it to the air box or leave as it is?
|
|
|
|
Post by chewbaca on Feb 4, 2018 22:15:23 GMT -5
its supposed to connect to the intake manifold but it really needs an oil trap most common stock configuration is an undersized oil trap in the front of the air box but its problematic and will eventually coat your valves and piston in carbon crust I recommend adding an oil trap that will drain back into the case or is big enough to handle a full cup of oil I made this one  its not to difficult just some PVC and nylon NPT barbs prolly cost $5 |
|
|
|
Post by hillbillybob on Feb 8, 2018 5:28:38 GMT -5
A bit over 13,000 miles ago, I made a catch can for my scooter.....similar to what chewbaca did. Mine however vents to the atmosphere, and I'll add... has never expelled so much as a drop of liquid. I just remove, drain, and reinstall, every other oil change. This link will show you what I did for a couple of bucks. |
|
|
|
Pair system
by: toddmaples - Feb 8, 2018 11:35:17 GMT -5
via mobile
Post by toddmaples on Feb 8, 2018 11:35:17 GMT -5
Ay, anyone knows where the vent hose that comes from valve cover goes? Can i just connect it to the air box or leave as it is? If you pull the line from the intake to valve cover, make sure to have the open end above the engine as far as possible (other end goes to valve cover), and i recommend a catch can, preferably with a pcv valve/breather so it breathes properly... |
|
Freshman Rider
Currently Offline
Posts: 82
Likes: 4
Joined: Mar 18, 2017 11:12:13 GMT -5
|
Pair system
by: 125scooterbro - Feb 9, 2018 5:03:15 GMT -5
via mobile
Post by 125scooterbro on Feb 9, 2018 5:03:15 GMT -5
Thanks everyone, i will fix a catch can with 2 pipes at the end one short and one long so it can also breathe
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Feb 12, 2018 21:48:02 GMT -5
|
Post by joeman on Feb 12, 2018 23:08:24 GMT -5
Thanks everyone, i will fix a catch can with 2 pipes at the end one short and one long so it can also breathe I have gas coming out of my ventilation hose is that normal |
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Feb 12, 2018 21:48:02 GMT -5
|
Post by joeman on Feb 12, 2018 23:10:17 GMT -5
I have gas coming out of my ventilation hose is that normal
|
|
Freshman Rider
Currently Offline
Posts: 82
Likes: 4
Joined: Mar 18, 2017 11:12:13 GMT -5
|
Pair system
by: 125scooterbro - Feb 15, 2018 16:56:58 GMT -5
via mobile
Post by 125scooterbro on Feb 15, 2018 16:56:58 GMT -5
I have gas coming out of my ventilation hose is that normal wich ventilation hose? If it's the drain hose from the bottom of the carb maybe the screw got loose and you need to screw it back in, but i doubt that is the problem, look it up |
|
