Freshman Rider
Currently Offline
Posts: 82
Likes: 4
Joined: Mar 18, 2017 11:12:13 GMT -5
|
Vibration
by: 125scooterbro - Sept 10, 2017 15:54:06 GMT -5
via mobile
Post by 125scooterbro on Sept 10, 2017 15:54:06 GMT -5
Before i take apart something, today when i start the scoot and get ready to go i have vibrations after i take off. but after i reach about 20 kmph it was gone, my guess is the transmision?
|
|
|
Vibration
by: pistonguy - Sept 10, 2017 18:39:24 GMT -5
Post by pistonguy on Sept 10, 2017 18:39:24 GMT -5
Sounds like your Clutch is "Chattering", The Bell and Pads are Glazed, Simple Service should fix her.
|
|
|
Vibration
by: cyborg55 - Sept 11, 2017 8:20:18 GMT -5
Post by cyborg55 on Sept 11, 2017 8:20:18 GMT -5
I'll chime in here and side with piston yet again,,,it's either the pads /bell glazed or a spot or two of grease/oil got on the swept area of the bell and is pulsing when the pads sweep thru the contamination
|
|
Freshman Rider
Currently Offline
Posts: 82
Likes: 4
Joined: Mar 18, 2017 11:12:13 GMT -5
|
Vibration
by: 125scooterbro - Sept 11, 2017 8:36:44 GMT -5
via mobile
Post by 125scooterbro on Sept 11, 2017 8:36:44 GMT -5
I'll chime in here and side with piston yet again,,,it's either the pads /bell glazed or a spot or two of grease/oil got on the swept area of the bell and is pulsing when the pads sweep thru the contamination this thing happen only on the first take off, when the engine is warm there is no vibration, i'm afraid it may be the piston because i do a complete service on the transmision not long ago and the day before i have this problem i may drive it to rough because i was in a hurry to get to work
|
|
|
Vibration
by: pistonguy - Sept 11, 2017 19:27:08 GMT -5
Post by pistonguy on Sept 11, 2017 19:27:08 GMT -5
I'll chime in here and side with piston yet again,,,it's either the pads /bell glazed or a spot or two of grease/oil got on the swept area of the bell and is pulsing when the pads sweep thru the contamination this thing happen only on the first take off, when the engine is warm there is no vibration, i'm afraid it may be the piston because i do a complete service on the transmision not long ago and the day before i have this problem i may drive it to rough because i was in a hurry to get to work The Clutch, Belt and Vari are all Cold, they will make a extra squeak or two when Cold at take off. Mine does. Remove cover and service. Your dealing with Pistonguy here Ill let ya know if anything sounds like a Piston problem.
|
|