New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Front forks
by: coryftl - Aug 12, 2019 15:14:40 GMT -5
via mobile
Post by coryftl on Aug 12, 2019 15:14:40 GMT -5
150 PowerMax scooter. When I stopping and press my front brakes my front tire we'll jog to the right or jog to the left. What causes that. Then I have to restraint in it. Then the Tire will be straight and my handlebars OB off not straight. Then I will roll my scooter back and press the front brake then like spring back to normal. What causes that. For example say if I'm driving and I'm plying my brakes my front tire will stay straight but my handlebars will shift. I have my handlebars securely bolted to top of forks and I also have a couple little welds on there. So the handlebars is secure. It has to do with the lower part of the forks. Does anybody have any experience with this? It was my Triple Tree was cracked replacement and all good now |
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Front forks
by: coryftl - Aug 3, 2019 13:27:16 GMT -5
via mobile
Post by coryftl on Aug 3, 2019 13:27:16 GMT -5
everything it's tight and snug on my front forks. But I'm still getting very much Flex entire out of alignment when I brake hard. Then I have to play if the brakes and push it to reline it. What causes this question
|
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Post by coryftl on Aug 2, 2019 18:19:22 GMT -5
|
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Front forks
by: coryftl - Aug 2, 2019 6:42:34 GMT -5
via mobile
Post by coryftl on Aug 2, 2019 6:42:34 GMT -5
there is a little spacer that goes on the neck tube nut without it you cannot fully clamp the handle bars. Is the spacer in place? Yes it has top nut and one larger under it. Total of two. |
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Front forks
by: coryftl - Aug 1, 2019 19:01:29 GMT -5
via mobile
Post by coryftl on Aug 1, 2019 19:01:29 GMT -5
it sounds like your entire head set and handlebar is loose What you mean? I have the handlebars nice and snug and the nuts on the handlebars snug there's no play in the in the shaft that goes through the frame to the steering column. |
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Front forks
by: coryftl - Aug 1, 2019 18:50:02 GMT -5
via mobile
Post by coryftl on Aug 1, 2019 18:50:02 GMT -5
it sounds like your entire head set and handlebar is loose What you mean? |
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Aug 1, 2019 16:45:21 GMT -5
|
Front forks
by: coryftl - Aug 1, 2019 18:23:50 GMT -5
via mobile
Post by coryftl on Aug 1, 2019 18:23:50 GMT -5
150 PowerMax scooter. When I stopping and press my front brakes my front tire we'll jog to the right or jog to the left. What causes that. Then I have to restraint in it. Then the Tire will be straight and my handlebars OB off not straight. Then I will roll my scooter back and press the front brake then like spring back to normal. What causes that. For example say if I'm driving and I'm plying my brakes my front tire will stay straight but my handlebars will shift. I have my handlebars securely bolted to top of forks and I also have a couple little welds on there. So the handlebars is secure. It has to do with the lower part of the forks. Does anybody have any experience with this?
|
|
