Freshman Rider
Currently Offline
Posts: 53 
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 28, 2015 13:54:57 GMT -5
I agree, looks like you are going to have to pull the head at least. Hopefully it's just the head gasket, otherwise you will need to check the rings, and re-hone the cylinder if it's not damaged. do those hoses belong hooked up to anything and if I have to get a new head gasket or new rings how much is it going to cost me round about you think |
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 28, 2015 0:18:59 GMT -5
Can you post a pic of the tube? If you can get a pic or vid of the smoke, that would help to. I was hoping to get some feedback from you? When you have time |
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 26, 2015 0:25:34 GMT -5
Air-cooled? Or watercooled?,, watercooled head gasket went away,,, air-cooled? Broke a ring [br Its air cooled? And i assume that all my hoses are ok? And would i still be abe to drive it which i do if ring was busted? And how much is that gonna cost me? Is it something i can fix fairly easy? Thank you |
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 25, 2015 20:22:52 GMT -5
Video of breather hose blowing white oily smoke after about 2 miles of drive with extreme power loss
|
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 25, 2015 19:25:24 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 25, 2015 19:19:12 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 25, 2015 10:33:18 GMT -5
Just replaced my carburetor on my 2010 jonway scooter having problems with rpms and also there is white smoke coming from the vacumm line that comes out of breather tube. Is that hose supposed to be connected to something? And why am i losing so much power? When i first start it up it seems ro run fine. Still with loss of power. But after about 10 minutes of riding the smoke starts. It is a white smoke that has alot of moisture coming out of the hose from the breather tube.. also the more i ride the more of power loss to the point were i haft to turn it off because the engine gets really loud and really loss of power and ideas thank you
|
|
Freshman Rider
Currently Offline
Posts: 53
Likes: 2
Joined: May 24, 2015 17:58:02 GMT -5
|
Post by marcus22 on May 25, 2015 2:00:19 GMT -5
Just wanted to say thank you for letting me join, i really could use some help i have a 2010 johnway scooter and am having rpm problems and vacuum hose confusion will post later for help
|
|
