New Rider
Currently Offline
Posts: 4 
Likes: 0
Joined: May 16, 2014 11:24:48 GMT -5
|
CVT problem?
by: xx5150x - May 19, 2014 0:00:03 GMT -5
via mobile
Post by xx5150x on May 19, 2014 0:00:03 GMT -5
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: May 16, 2014 11:24:48 GMT -5
|
CVT problem?
by: xx5150x - May 17, 2014 12:34:36 GMT -5
via mobile
Post by xx5150x on May 17, 2014 12:34:36 GMT -5
Thanks all for the replies. I'll try to get another video up a little later
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: May 16, 2014 11:24:48 GMT -5
|
Post by xx5150x on May 16, 2014 23:00:15 GMT -5
Got this scooter in trade (non running and not knowing any of its history) anyways got it running (changed plug,carb,fuel filter,gas,oil) but it has no power at all.with the rear wheel off the ground it runs fine till redline,but as soon as the wheels on the ground and you try to go it just bogs and shakes(almost like its stuck in high gear) with the cvt cover off first I noticed the clutch bell gets extremely hot after running for only a minute.From what I can see on YouTube videos,there's a gap that closes under throttle where the clutch bell is(I assume this is for the clutch opening) on mine there's no gap at all?havent got a chance to get an impact to take the clutch apart heres a link to the video and pic (if I didn't add it right) s254.photobucket.com/user/laura9479/media/Mobile%20Uploads/image.jpg.html?filters[user]=62349270&filters[recent]=1&sort=1&o=0![]() |
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: May 16, 2014 11:24:48 GMT -5
|
Post by xx5150x on May 16, 2014 11:53:43 GMT -5
First off, great site,lots of useful info here. Anyways new user here from the boring state of "moo hampshire"thought I'd post in the introduction section before I ask for help on my scooter,, from what I know I have a Znen king (zn150t-9) got this in trade in pretty much poor condition, but planning on rebuilding everything.
|
|
