New Rider
Currently Offline
Posts: 2 
Likes: 0
Joined: Mar 29, 2014 17:41:36 GMT -5
|
Post by thetucks on Mar 29, 2014 18:53:20 GMT -5
Im not completly sure how to set the valves. than manual is not real clear on how to do it. But I believe I have them set and the carb adjusted. This is the honda clone engine so I cant just set the valves at .004 and .006.
|
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Mar 29, 2014 17:41:36 GMT -5
|
Post by thetucks on Mar 29, 2014 17:52:18 GMT -5
I have a 2008 sunl 250 scooter that I just got. Its not running. the previous owner could not get it to run so he sold it to me.
This is the honda clone engine.
I checked the timing and the timing mark on the flywheel is lined up with the piston at tdc. I took the valve cover off and the valve lobe is lined up correctly also. I can get it to idle sometimes smooth but most of the time ruff. but if I try to give it any gas it will die. also it will not idle very long if I let it set and idle. after about 30 secs it will die. I have replaced the carb with a new one. I have replaced the electric choke. I have checked the fuel pump and it works good. I am stumped at what it could be. Any help will be greatly appreciated. thanks.
|
|
