New Rider
Currently Offline
Posts: 21 
Likes: 2
Joined: Oct 6, 2013 21:46:49 GMT -5
|
Post by olescoot on Oct 12, 2013 9:46:47 GMT -5
Thanks for great info!!
|
|
New Rider
Currently Offline
Posts: 21
Likes: 2
Joined: Oct 6, 2013 21:46:49 GMT -5
|
Post by olescoot on Oct 12, 2013 0:11:23 GMT -5
Picture later when I take off the panels again. The luggage rack is a pain to put backon.
The Cdi was in a rubber sling and marked 80 80. The wire was under the sling a nd was loop out and into Cdi case. All separate from other wires.
Scooter was manufactured in 08 but titled as 2011. Had 3 km on spedo when purchased this month.
|
|
New Rider
Currently Offline
Posts: 21
Likes: 2
Joined: Oct 6, 2013 21:46:49 GMT -5
|
Post by olescoot on Oct 11, 2013 23:06:18 GMT -5
The wire was brown. Speedometer 10% fast. Now 40 at 7k easy. Low miles so didn't push it. Probably would do more with lighter rollers. Appreciate all the good advice.
|
|
New Rider
Currently Offline
Posts: 21
Likes: 2
Joined: Oct 6, 2013 21:46:49 GMT -5
|
Post by olescoot on Oct 11, 2013 13:25:30 GMT -5
Thanks for the great info. Just a newby so will wait till I have more experience before taking on the rollers. Haven't even had the panels off yet.
|
|
New Rider
Currently Offline
Posts: 21
Likes: 2
Joined: Oct 6, 2013 21:46:49 GMT -5
|
Post by olescoot on Oct 11, 2013 0:00:46 GMT -5
New owner, first scooter. Understand scooter is regulated. Goes 32 mph@6500 rpm with lots of throttle left but no response to more throtle. Live in Phoenix so would be good to go 40 - 45. Dealer told me to cut green wire under rubber band on Cdi and tape ends. Alleyoop mentioned in a thread to cut red wire? Wireing diagram does not show red or green wwire. How does this work if it does and would I gain more rpm/speed?
|
|
