New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Jul 15, 2013 2:38:31 GMT -5
|
Post by sherman on Jul 15, 2013 23:48:49 GMT -5
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Jul 15, 2013 2:38:31 GMT -5
|
Post by sherman on Jul 15, 2013 20:59:33 GMT -5
Just put in a new spark plug in and it runs a little better now but still not going above 30. The vacuum seems good and snug.
I also found out that the oil level seems pretty high, All the "xxxx" are covered with oil when I put the dip stick back, not screwed in. I have no idea how the oil level should be like.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Jul 15, 2013 2:38:31 GMT -5
|
Post by sherman on Jul 15, 2013 18:55:37 GMT -5
The airbox is in there as well as the filter.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Jul 15, 2013 2:38:31 GMT -5
|
Post by sherman on Jul 15, 2013 17:07:40 GMT -5
The diaphragm is still soft and nice. The needle is back in the little hole. The petcock is bought brand new from a parts store. The filter is new from O'reilly but it looks different, it has a metal cartridge instead of the paper type in the original one.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Jul 15, 2013 2:38:31 GMT -5
|
Post by sherman on Jul 15, 2013 2:48:11 GMT -5
Hello everyone, my first post here and I need some help from you all.
I just picked up a 150cc Chinese Scooter from my friend but after all the cleaning it still bogs down above half throttle. It had been sitting for nearly a year but starts with some fresh gas and a jumpstart.
I have taken the carb apart and cleaned it, ran tiny wire through the pilot jet and main jet.
Starting is easy, runs very smooth and pulls from start to 25 mph. However, it bogs down when I try to open the throttle more. I tried to twist it all the way down quickly and it does pulls for half a second and starts to bog. Thanks for any input.
|
|
