New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Jun 30, 2015 1:57:13 GMT -5
I also found this Carb for $60 which seem similar. It says its a 30mm Carb. I'm not sure if the stock carb is 30mm or 32mm the performance ones ive seen are 32mm. Its different on the bottom front. you can see on mine there is a brass nipple. I forget what its to though.  |
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Jun 30, 2015 1:31:40 GMT -5
This is the only one I have been able to find that looks like mine but its $170. Ebay Carbscrappy has a 32mm carb it says is for the linhai but has a different bracket for the throttle cable. Does the different bracket work with the scooter just differently? If so I might try that one its like $120 |
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Jun 30, 2015 0:23:01 GMT -5
Hi everyone havent been on the boards in awhile. bought a Honda NC700XD last spring and my 2 scooters have just been sitting in the garage. I absolutely love the NC700 though has a DCT and trunk for storage, everything I wanted in a scooter with a lot more power and performance. Anyway. I think I'm going to sell my Linhai 260 so have been getting it cleaned up. Started painting it this weekend. Its had a bad hesitation going from idle to speed for a long time. Once it switches to the main jet it runs fine but in stop and go traffic its awful. Ive cleaned the carb several times including the jets. Either something is seriously wrong in the jets or I suspect its the diaphragm that doesn't seat properly. So Im looking either for a rebuild kit or a new carb. Hopefully a reasonably priced one trying not to dump a ton more money into it cause I know I wont get it back. Here are some pics of the type I have.     |
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Aug 18, 2013 15:12:40 GMT -5
JR that doesnt look like my carb especially in the throttle cable part. All the carbs like mine I have fount are in the 100-200 dollar range.
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Aug 18, 2013 14:16:16 GMT -5
Seems to be running fine. ill need to ride it for an extended period to see if its really ok.
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Aug 15, 2013 21:06:00 GMT -5
Hey guys I'm looking for a carb rebuild kit, I have an old diaphragm I want to replace. I cant find one that says its for the linhai and i know a lot of the clones are probably the same one so does anyone know who is selling the right one?
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Aug 15, 2013 21:03:47 GMT -5
Hello I went to adjust my valves today while I had all the plastics off hoping it would solve the problem Ive been having since the winter. When I went to set TDC i realized the sprocket and the silver washer like thing on top are lined up so the holes go straight through both. So this doesn't let you see the mark to line it up. Here is hat it should look like. i173.photobucket.com/albums/w59/RubiconTX/scooter/scoot001.jpgSo what I did was get it so both valves where up and full compression with the arrow near the oil plug lined up. It looked like it was close to where the line should be so I hope it was right. |
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Aug 15, 2013 20:54:28 GMT -5
Jeep thats what I intended to do but after a couple of days saying I need to get one I just tossed a dime in.
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Aug 11, 2013 19:21:47 GMT -5
Started tuning my Linhai 260 getting high in milage. So while changing my brakes and building pressure in the lines the little bubble that tells you your brake fluid level cracked and leaked. So rather then pay 100$ for a new one or take a chance on a similar but different on ebay, I fixed it with a dime. A dime fits perfectly in the whole and I even managed to get the metal ring that held the glass in on top of it. Also I need to rebuild the carb, bad diaphragm. Anyone know of a kit? Attachments:
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Jul 9, 2013 16:21:19 GMT -5
called over to sunright got a couple parts but I know a few should be the same as a lot of the other 260 clones and might be cheaper. Like rotors, variator and rollers?
Also is there a rebuild kit for the Carb somewhere?
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Jul 6, 2013 19:47:25 GMT -5
|
Post by fleetingyouth on Jul 6, 2013 20:23:39 GMT -5
hey all just moved over from the old forums. Im looking for a bunch of parts to tune up the scoot about to hit 10k so time to replace things. 1st i found these brake pads can someone confirm they are the right pads? www.partsforchinesescooters.com/2/Rear_Brake_Pads_Linhai_Powermax_260-2225.htmlAlso i found 2 different drive belt sizes what is the better way to go and what are the differences? I want to replace all the vacuum and fuel hoses can anyone recommend a good source? Lots of other parts but this is a start. Mike |
|
