Freshman Rider
Currently Offline
Posts: 90
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Jun 17, 2016 17:51:49 GMT -5
So what's up? Finally found a exhaust shop to build my gy6 up I have a few concerns though. Should I stick with having the stock 50 exhaust pipe mounted with the 3/4 changed to 1inch pipe or should I go full straight piped, full custom exhaust? That's $100.00 on the table hands down. In regards to tires, I want to do a overall tire swap out due to my rear suspensions higher on 10's, I was told biggest I can go is 110/ /10 in the rear (please verify for p codes please for figment.) Accessories wanted: Stereo 1 speaker (6x9) and two tweeters how much voltage/w can a stock pcode gy6 pull at low idle and how much at wot? Last, is the gy6 tank 50 from 07 non disc brake a 105mm brake set or 110mm.
|
|
|
Post by mrsunsett on Jun 21, 2016 1:21:59 GMT -5
Jesus man, where are you gonna get the space for the sound system, i wanted to do that on my wifs zummer... but its just, not enough room to work with... ide have to stretch the bike move the gas tank back and lower where the carb is sitting....
|
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Jun 21, 2016 10:54:25 GMT -5
Bike was originally a 2t but has the oil tank removed just enough space for a 6x9 open bottom. About 1 1/2 to 2 3/4 inches of space from the gas tank depending on how its mounted I also have a glove box that's pretty much useless from my prospective other then stuffing parts a small bag of macs in there anywho, its about enough space to add 2 6's or some smaller speakers, main problem what's the OEM strator voltages some say don't past 35w.
|
|