New Rider
Currently Offline
Posts: 2 
Likes: 0
Joined: Jun 15, 2016 15:05:39 GMT -5
|
Post by editundo1 on Jun 15, 2016 15:11:07 GMT -5
Okay so I have a tao tao 50. Everything works fine when I kickstart it runs/lights ect. So...I put a new fuse in, turn the key to start position and dash lights come on. Then put the kill switch in on mode and everything is fine. Then when I pull the brake the fuse blows out. What could my issues be?
|
|
|
|
Post by lain on Jun 15, 2016 18:05:10 GMT -5
Most likely a wire loose and grounding where it shouldn't somewhere between the brake lever and the battery.
|
|
New Rider
Currently Offline
Posts: 2
Likes: 0
Joined: Jun 15, 2016 15:05:39 GMT -5
|
Post by editundo1 on Jun 15, 2016 18:19:49 GMT -5
That's sort of what I assumed but the front seems a bit harder to test things. I have a multimeter just needed a battery for it. will try to check it out unless anyone else knows other possible scenarios?
|
|
