New Rider
Currently Offline
Posts: 5 
Likes: 0
Joined: May 29, 2016 1:56:59 GMT -5
|
Post by madhatter4119 on May 29, 2016 11:22:44 GMT -5
Hi...I'm in dire need of some help in getting the above scooter running...Since it does not have any
spark at the plug...I need the help of the forums electrical guru's. A brief history as told to me from the
PO...It was running good when it was parked in the shed just over 2 yrs ago...I put a new battery in it
...Cleaned both the gas tank and carb...which wasn't that bad...seen worse...After trying to start it a few
time...I pulled the spark plug wire off the plug...put a new plug in the cap...grounded the plug to the engine...hit the start switch and no spark...I was holding the rear brake handle and the kill switch was on
and key was on...I assume with new gas and a good carb cleaning...it would fire right up...The scooter is in very good condition and only has 1200+ miles on it...I'm not real good with electrical stuff...I did test
both sides of the coil...it tested good...I can't afford to throw money at this scooter until I'm sure I buying
something that needs replacing...Help if you can...Thanks
|
|
|
|
Post by tortoise on May 29, 2016 12:59:42 GMT -5
|
|
|
|
Post by JerryScript on May 29, 2016 16:41:45 GMT -5
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: May 29, 2016 1:56:59 GMT -5
|
Post by madhatter4119 on Jun 1, 2016 8:41:45 GMT -5
Can't seem to find a wiring diagram for a 02 Kymco ZX50 Super Fever...Couldn't find one in the manual...Need info
on the Run/Kill switch...Couldn't find much in the manual about the switch...Anybody know what color wires are at the
switch...For testing I would like to by-pass it to see if I get spark at the spark plug...Need to know what wires to jump so it
has power all the time when key is on...Please Help...Thanks
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: May 29, 2016 1:56:59 GMT -5
|
Post by madhatter4119 on Jun 4, 2016 9:39:55 GMT -5
No interest I guess...that's a shame
|
|
|
|
Post by JerryScript on Jun 4, 2016 11:52:14 GMT -5
Sorry, I don't believe we have many if any members who own that model. It's very easy to trace wires with a multi meter or test light.
|
|
New Rider
Currently Offline
Posts: 5
Likes: 0
Joined: May 29, 2016 1:56:59 GMT -5
|
Post by madhatter4119 on Jun 7, 2016 16:44:45 GMT -5
That's easy for you to say...LOL
|
|
