New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Apr 2, 2013 23:44:25 GMT -5
|
Post by dadsfav2 on Apr 3, 2013 0:32:41 GMT -5
okay I am new to the site, Hello everyone ! and have a couple of ?'s, I hope i can get help with. I have a 2008 MC68A 150cc Roketa scooter, that i purchased last winter and love it , it is awesome for around town, but i cannot find a manual for my particular model, it seem they were made for this particular year model only in 2008. my rear brake handle bar switch has gone out, which will not let the electric start function, is there a way to bypass the switch or safety mechanism till I can get new one installed? Any input would be greatly appreciated, Thank you all and have a awesome day. Attachments:
|
|
|
Post by terrilee on Apr 3, 2013 8:02:55 GMT -5
HI & WELCOME
just use the other brake. they are both the same. if your sure its the switch just order another.
im not sure but this should be the switch you need since they are so cheap order a left & rightAttachments:
|
|
|
Post by JR on Apr 3, 2013 11:10:14 GMT -5
We have a complete list of Roketa manuals in the Chinese Manual section of the Tech area but they are not much help. You'll find a better manual especially for troubleshooting in this section: itistheride.boards.net/index.cgi?board=50ac&action=display&thread=54But Terrilee is right either handle will start the engine unless of course it's bad too. Also I would not bypass this system, it is an important safety feature and do remember if the scooter won't start with one or either of the brakes pressed then you have no brake lights either which for sure is dangerous. JR
|
|