New Rider
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 13, 2015 18:22:25 GMT -5
|
Post by rich on Nov 23, 2015 17:53:51 GMT -5
So, after replacing the cdi, coil and sparkplug, then running for a few weeks, the scoot wouldn't crank on me the other night. Getting no spark to sparkplug boot... After determining my red wire going into stator coil wasn't pulling any ohms per this video: at 10:28 I'm looking to replace the stator. My plug coming from my stator looks like this: But most of the stators on ebay on parts stores for any gy6 150cc, have plugs that are like this: Anyone know which one I'm looking for?
|
|
|
Post by tvnacman on Nov 23, 2015 20:08:09 GMT -5
|
|
New Rider
Currently Offline
Posts: 43
Likes: 1
Joined: Apr 13, 2015 18:22:25 GMT -5
|
Post by rich on Nov 23, 2015 22:17:38 GMT -5
Thanks! looks right! was there something I should have been searching for to come up with that result?
|
|
|
Post by tvnacman on Nov 24, 2015 10:36:50 GMT -5
Thanks! looks right! was there something I should have been searching for to come up with that result? Sure all you needed to do was go to NYCSooterParts.Com John
|
|