New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Oct 6, 2015 19:25:06 GMT -5
|
Post by blecroy on Oct 6, 2015 19:55:36 GMT -5
My cooling fan stop working so I took it out and and found a rock stuck through the guard just for enough to stop the fan. I pulled the fan out and and cleaned it up and put it back in. I ran the scooter and the fan still did not come on . I looked for fuses but did not find any where would I look next. JR, Doug, JerryScript, skuttadawg, JoeyBee, earlwb, |
|
|
|
Post by JerryScript on Oct 6, 2015 21:06:40 GMT -5
Does the fan turn with slight resistance now? If not, the connection at the bearing may be shot.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Oct 6, 2015 19:25:06 GMT -5
|
Post by blecroy on Oct 7, 2015 18:45:45 GMT -5
When I had the fan off I put 12 volt to it and it ran but on the scooter it will not so I though a fuse was blown but I do not find a fuse.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Oct 6, 2015 19:25:06 GMT -5
|
Post by blecroy on Oct 7, 2015 18:48:21 GMT -5
When I had the fan off I put 12 volt to it and it ran but on the scooter it will not so I though a fuse was blown but I do not find a fuse.
|
|
New Rider
Currently Offline
Posts: 4
Likes: 0
Joined: Oct 6, 2015 19:25:06 GMT -5
|
Post by blecroy on Oct 18, 2015 19:14:10 GMT -5
I hook the fan up direct with a switch and it runs but the hot light still comes on with the fan running so is there a thermostat and if so where would it be and how do you get to it.
|
|
