No Spark  By  d3stadtlander (Read 671 times)

I have 50cc scooter that I am failing to get any spark on. The wiring on the thing is a little bit of a mess towards the front end (this is how I got it). Originally I thought the coil was bad so I tried a different one and that didn't do the trick. The next logical move was to try a different CDI box, tried 4 different ones with no success. Next thought was bad stator, so I broke out the multimeter and did some readings on the wires coming off of it. I should also add I have tried two brand new spark plugs. 

I have a black wire which I believe to be my CDI power that is registering about 75 volts AC.
I have a blue wire which I believe is the Trigger Pickup wire that is registering around 1-6 volts AC.
On the black/green wire that goes to coil I am not registering any voltage (from what I can remember).

According to the information I have found about stators these readings are in line with a normal functioning stator. 

One thing I am curious about is if I am having a problem at my ignition or kill switch. Is there a way to trick the CDI into thinking that it is on?

One more thing. I think this moped was equipped with an alarm and remote start. Both of these things seem pointless to me. Can I safely remove them without any problems?

Any suggestions about what to do to get some spark would be great.

Thanks