Harbor Freight - Pittsburgh 6pc technical measuring set
by: scooter - Jul 7, 2015 22:17:00 GMT -5
beenriding likes this
Post by scooter on Jul 7, 2015 22:17:00 GMT -5
Here's one of those things that belongs in any toolbox, especially if you need to measure things and need more than a tape measure or a caliper to get the job done.
I just used the 6" spring outside caliper (third tool from the left) to measure a valve's length while it was still in the head. Just put one end on the bottom of the valve, adjust the other end onto the top, then measure the gap in the tool with a ruler or caliper. Just one of many jobs made easy by having the right tools!
These tools let you measure odd shapes and get around obstacles. The set includes a 6" pocket ruler, 6" dividers, 6" outside calipers, 6" inside calipers, 6" angle and depth gauge, and a 5" analog caliper.
This is a nice little starter set, and for 9.99 it's a real steal!
I just used the 6" spring outside caliper (third tool from the left) to measure a valve's length while it was still in the head. Just put one end on the bottom of the valve, adjust the other end onto the top, then measure the gap in the tool with a ruler or caliper. Just one of many jobs made easy by having the right tools!
These tools let you measure odd shapes and get around obstacles. The set includes a 6" pocket ruler, 6" dividers, 6" outside calipers, 6" inside calipers, 6" angle and depth gauge, and a 5" analog caliper.
This is a nice little starter set, and for 9.99 it's a real steal!
