New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: May 31, 2015 11:57:17 GMT -5
|
Post by lumberjak on May 31, 2015 12:12:36 GMT -5
ok so i have a TGB 2 stroke moped wheni got it it did not want to run i could get it to start but if i gave it any throttle it would bog out. well i fixes the air filter an it and put it back on and now the thing wont start so i took the gas hose off the carb to make sure that it was gettin.gas to the carb and it just spits it out it dont flow out i then pulled off the vac hose as well and when i pulled on it the gas flowed out freely i have no knowledge of mopeds so im bascily learning as i go any help would be great thank you
|
|
|
Post by cyborg on Jun 1, 2015 9:00:12 GMT -5
is there a small square box cast on the cylinder behind where the carb bolts on?,,,if so pull the carb and the top of that box and see if the reeds are cracked,,,
|
|
|
Post by cyborg on Jun 3, 2015 10:15:48 GMT -5
any luck?,,,post a pic of where the carb meets the cylinder,,,lets see if we can sort this thing out
|
|