cfmoto fashion 250 how to change the rear turn signal bulb?
by: scooter - Jan 27, 2015 23:12:41 GMT -5
Post by scooter on Jan 27, 2015 23:12:41 GMT -5
Can someone tell me how to change the rear turn signal bulb on a Fashion 250 helix clone? I could not get the bulb out through the back, and I tried unclipping the lens on the side and pulling on it but it didn't come loose and I don't want to break it. I didn't see how to do it in the manual or online.
Got it, thank you. You have to pull the red lens cover next to it off to get to the screw for the turn signal. The crazy thing is that the bulb was good, so I touched a wire to the light ground and to the engine and the blinker started working and kept working after I took the jumper wire away.
Got it, thank you. You have to pull the red lens cover next to it off to get to the screw for the turn signal. The crazy thing is that the bulb was good, so I touched a wire to the light ground and to the engine and the blinker started working and kept working after I took the jumper wire away.
