|
|
Post by ricardoguitars on Dec 2, 2014 0:05:06 GMT -5
|
|
|
|
Post by scooter on Dec 2, 2014 1:25:37 GMT -5
I've been poking around and it looks like it might be M10x1.25  I measured the bolt in his picture. If it's full size, I'd agree and say M10x1.25. It would be pure luck if it just happened to be exactly to size on my screen. If it is, kudos on your fine detective work!  |
|
|
|
Post by spandi on Dec 2, 2014 2:21:41 GMT -5
|
|
|
|
Post by spandi on Dec 2, 2014 2:33:40 GMT -5
Thanks scooter. (just as long as we finally find the right one) |
|
|
|
Post by ricardoguitars on Dec 2, 2014 8:07:04 GMT -5
I didn't find 10mm x 1.25mm nuts, but I found 8mm x 1.25mm and 10mm x 1.5mm, I ordered both, they are cheap anyway, lets see which one works  |
|
|
|
Post by spandi on Dec 2, 2014 12:57:54 GMT -5
|
|
|
|
Post by tvnacman on Dec 2, 2014 14:16:55 GMT -5
On mine the threads were striped , I drilled the threads out . Stuck the bolt out from the inside . Put the bushing from the inside on the bolt . Then on the outside I put a washer and a nylon lock nut . Same for both sides .
John
|
|
Freshman Rider
Currently Offline
if God had wanted us to be naked we would have been born that way , Hey wait a minute
Posts: 67 
Likes: 14
Joined: Jun 25, 2014 10:04:47 GMT -5
|
Post by nakedguy on Dec 2, 2014 18:59:17 GMT -5
Nope, I still have one of the old nuts, the other one fell off on the road, the stand almost made me crash when it got loose  If that is the case about almost getting road rash then everyone should either use nylon n lock nuts or drill and safety wire them , I have had that rash and it does not wash off |
|
|
|
Post by spandi on Dec 2, 2014 19:21:38 GMT -5
|
|
