Post by scooter on Oct 20, 2014 16:00:21 GMT -5
For anyone interested in joining in, I'd like to know your "zero" times. Zero to 20, zero to 40, 45, 50, 55, etc. Please post them if you know them, or go out and find out and then tell us! Obviously the best run would be on level ground with little or no wind. Please include as much info about your setup as you can. For instance I am running a stock 150cc gy6 1P57QMJ type "A" engine with a 105-107mm(standard) variator, with an 835, 20, 30 belt, with 8gram dr pulley sliders, stock clutch, and 115 jet on 12" tires (120-70-12 on the rear). I weigh close to 300lbs, and, from what I've read, my scooter weighs 255-300 pounds (those poor tires!). You might have a bbk, big cam, stroker crank, fuel injection or whatever.
If you include RPM data, please try to get the RPM at a certain MHP. i.e. 7500rpm@55mph. You can also include temperature, humidity, altitude, and any other data you can think of, but at least give us the zero times for whatever mph you choose to run from a standstill. Only include the info you are comfortable with.
Thanks! BTW I'm running an unofficial 0-50 of 20 seconds with the above setup. I'll go for an official run tomorrow at my favorite reference spot.
If you include RPM data, please try to get the RPM at a certain MHP. i.e. 7500rpm@55mph. You can also include temperature, humidity, altitude, and any other data you can think of, but at least give us the zero times for whatever mph you choose to run from a standstill. Only include the info you are comfortable with.
Thanks! BTW I'm running an unofficial 0-50 of 20 seconds with the above setup. I'll go for an official run tomorrow at my favorite reference spot.
