|
|
Post by earlylight160 on Oct 16, 2013 22:59:11 GMT -5
Here are a couple of quick and dirty projects which make a big difference once the sun goes down. Nothing difficult (no wiring required) ane very inexpensive. Total cost for four stick up tap on LED lights was approximately $9.00 plus 12 AAA batteries and install time was about 15 to 20 minutes.    |
|
Sophomore Rider
Currently Offline
Posts: 106
Likes: 0
Joined: Sept 11, 2013 23:04:09 GMT -5
|
Post by jdmsoldier on Oct 17, 2013 4:05:08 GMT -5
cool idea
|
|
|
|
Post by domindart on Oct 17, 2013 7:12:34 GMT -5
|
|
|
|
Post by ltdhpp on Oct 17, 2013 12:14:05 GMT -5
It took you 20 minutes to peel-and-stick 4 lights?? lol. jfwy
Those little lights are pretty awesome. I put one in my 150cc cargo area too. The reflex has one stock, but I had to find out the hard way that if you don't close the seat all the way it won't go out!
|
|
|
|
Post by spandi on Oct 17, 2013 16:09:17 GMT -5
It took you 20 minutes to peel-and-stick 4 lights?? lol. jfwy Those little lights are pretty awesome. I put one in my 150cc cargo area too. The reflex has one stock, but I had to find out the hard way that if you don't close the seat all the way it won't go out! At least this way you won't get an accidental main battery drain, and if you keep an extra set of rechargeable batteries (double A's?) in the scoot no lost of convenience either. |
|
|
|
Post by earlylight160 on Oct 17, 2013 21:38:50 GMT -5
20 min includd time to pick best spot to mount them as well as time to scrub the area with alcohol to insure they would stick well.  |
|
|
|
Post by earlylight160 on Oct 17, 2013 21:39:17 GMT -5
20 min includd time to pick best spot to mount them as well as time to scrub the area with alcohol to insure they would stick well. |
|
