Kymco Stator Problem?  By  duggan0504 (Read 2,039 times)

partsfinder.onlinemicrofiche.com/solanocycle/showmodel.asp?Type=13&make=kymcosc&A=60&B=10&vehicleid=2008-Kymco-Scooter-PEOPLE-125-S-(4-STROKE)-FAN-COVER/GENERATOR

According to the ignition manual you have a DC type powered CDI:

www.chinesescooterreference.com/pdf/Kymco_People_S_125_Ignition.pdf


This doesn't mean you have a DC charging system but again a DC type CDI. On the typical AC type stator with a AC type CDI you get the CDI supply voltage from the stator and a pickup pulse from the single coil on the stator also. With your stator you get the voltage to the CDI from the ignition which is a 12Vdc source and not for a AC source the stator.

On your stator you'll have the plug with wires going to the R/R and one single wire to the CDI again it is a DC type CDI according to the diagram.

JR