|
Post by larrball on Aug 23, 2013 18:32:45 GMT -5
OK guy's,gal's and others, As you might have read this thread. itistheride.boards.net/index.cgi?action=display&board=50ac&thread=3801&page=1#42736The answer is 'yes it will fit'. 17mm socket with the magnetic oil plug (Left side drain plug on a 50cc 139QMB) Installed after test drive, look's good and no leakage. Old drain plug and Dipstick shown above, at no cost to you. --------------------------------------------------------------------- I did however need to "work this drain plug into place a bit, but not so much as to "chase the threads". The Magnet is quite strong i picked up a 3 pound hammer with it just as a test. The link to the Ebay seller shipped in a timely fashion. I payed $18.99/free shipping, but i see the price went up a buck. humm.. www.ebay.com/itm/RARE-EARTH-MAGNETIC-OIL-DRAIN-PLUG-GY6-and-SYM-Scooter-/390647999423?vxp=mtr============================= Matt.. PFS.. you need to look into stocking this or one real close to it.
|
|
New Rider
Currently Offline
40 years on a Heinkel Tourist
Posts: 31
Likes: 1
Joined: Aug 20, 2013 7:35:03 GMT -5
|
Post by scootrboi on Aug 24, 2013 23:39:22 GMT -5
My old scooter uses a magnetic drainplug. It is a fine idea. These old scooters have no oil filter or screen. I found a round metal shim that had fallen into the engine stuck to the drainplug when I took the clutch cover off years ago.
|
|