New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Feb 27, 2013 15:06:55 GMT -5
|
Post by sdm on Aug 15, 2013 14:28:15 GMT -5
Hi,
Hope all is well with every body! My directionals don't work at all. How would I test them with my multi-meter? I would appreciate any help.
Thanks,
SDM
|
|
|
|
Post by scootnwinn on Aug 15, 2013 14:46:31 GMT -5
Pull the bulbs and touch the contacts check for voltage, is the first test. There are usually bullet connectors near the switch you want to set to ohm or continuity they should have continuity to when switch is on and not when off. Then check the flasher for voltage. Though you can normally hear or feel it clicking. If none of them work its the switch or the flasher...usually. check the ground wire for continuity to ground as well...
|
|
|
|
Post by spandi on Aug 15, 2013 15:00:39 GMT -5
I was thinking the same thing....that the relay went wonky.
|
|
