New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Mar 9, 2013 14:15:08 GMT -5
|
Post by keewee11 on Mar 9, 2013 14:54:37 GMT -5
Motor starts and scooter drives fine. The only electrical that works is the head light. It gets brighter with throttle. Key start ,turnsignals horn ,breaklight , and cluster lights do NOT work. I've been told its a bad ground.
|
|
|
|
Post by JR on Mar 9, 2013 19:50:33 GMT -5
Very good place to start and especially check it where the negative battery cable hooks to the frame. Fuse, did you check for a inline fuse off of the battery, lights run off of the stator so this is a voltage problem from the battery part of the system.
JR
JR
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Mar 9, 2013 14:15:08 GMT -5
|
Post by keewee11 on Mar 9, 2013 21:02:54 GMT -5
All the connections are good. i poped open the ignition switch to find only one wire coming out of it. there was another spot with sawder(Sorry about the spelling)and no wire connecting to it. would there be a reason for sawder with out a wire connection?
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Mar 9, 2013 14:15:08 GMT -5
|
Post by keewee11 on Mar 9, 2013 21:04:29 GMT -5
Im in the process of connecting all the wires right now. i think there may be a wire with no home. could it possibly be from the ignition switch or is one wire from that normal?
|
|
