Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 5:58:23 GMT -5
|
Post by Deleted on May 27, 2013 19:45:28 GMT -5
Still having intermittent sputter and Ive read loose coil connections could cause this. What connection am I looking for? Follow the wire from the plug to where it connects? Where is that connection usually at?
|
|
|
|
Post by scootnwinn on May 27, 2013 19:59:41 GMT -5
There are 2 one at the boot and one at the coil. It is just a screw into the wire sometimes they don't screw it in straight or hard enough
|
|
|
|
Post by earlwb on May 27, 2013 22:29:56 GMT -5
The factory can be notorious when the workers get in a hurry and just jam the spark plug wire into the coil or spark plug boot too. There is a inverted sheet metal screw inside the top of the coil and the spark plug wire sort of screws into it and then you slide the rubber cover down over it. If the wire is buggered up some, you can snip a little off to screw it on tight again. Sometimes the spark plug boot or cap is loose too and not down tight onto the spark plug. The other end of the coil has a couple of bayonet pins on it and the wires connect to it. But the connectors can be made from a soft material that gets loose too easily. I have replaced those connectors on my scooters with better ones that stay tight.
|
|
