Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 6:15:03 GMT -5
|
Post by Deleted on May 27, 2013 19:08:13 GMT -5
I took the rubber intake off that the carb attaches to and dont see a gasket. There seems to be a spacer between the intake tube and the motor but no gasket?
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on May 27, 2013 22:25:10 GMT -5
Im pretty sure there should be one. All of the scoots I have taken apart have had gaskets.
|
|
|
|
Post by earlwb on May 28, 2013 7:14:51 GMT -5
They sometimes use a O-ring instead of a gasket. But there ought to be something there though. The O-rings aren't all that good as a gasket in this location. The O-rings seem to deteriorate pretty quickly, usually by getting hard and loosing their seal. I have used some silicon gasket sealant there too.
|
|
|
|
Post by devo344a on May 28, 2013 11:05:37 GMT -5
Mine was messed up and the spacer was cracked I took out the spacer and used the red silicone and a Q-tip I always use them better than getting it on you but you can get into places you need but put the silicoe on bolted the carb on let it set for awhile and no more problem
|
|
