Freshman Rider
Currently Offline
Posts: 70
Likes: 0
Joined: Apr 24, 2013 16:58:15 GMT -5
|
Post by justputtnaround on May 25, 2013 13:02:01 GMT -5
I have a taotao 150 how do I know what my stock jet size is  I have added a free flow exhaust already getting a little back fire so I adjusted my air fuel screw helped a little. I have a air filter and intake assymble I am want to install but I know I must change my jets first because I do t want to run to lean. Any tips? |
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on May 25, 2013 13:12:43 GMT -5
I have a I similar set up and I run a 112. But I can get buy with a 110. You will most likely have a 108 in your scooter but the only way to tell is take it out and look.
|
|
Sophomore Rider
Currently Offline
Posts: 160
Likes: 0
Joined: Feb 27, 2013 22:58:57 GMT -5
|
Post by gy6girl on May 25, 2013 13:53:09 GMT -5
Similar here...
One of my scooters had a 105 that came with it.
It was written on the head.
On different scooter, it wasn't written and my best guess was like a 103. Smaller than the 105, I know that.
After changing the air filter, I went with a 110 and ran fine, but recently discovered that it can handle a 114.
|
|
Freshman Rider
Currently Offline
Posts: 70
Likes: 0
Joined: Apr 24, 2013 16:58:15 GMT -5
|
Post by justputtnaround on May 25, 2013 21:01:47 GMT -5
Right on I didn't know they were labeled I was hoping I didn't have to take it apart to find out..
|
|
Sophomore Rider
Currently Offline
Posts: 160
Likes: 0
Joined: Feb 27, 2013 22:58:57 GMT -5
|
Post by gy6girl on May 25, 2013 22:45:36 GMT -5
Not all of them are labeled.
If it's not labeled, I bet it's pretty small.
|
|
Freshman Rider
Currently Offline
Posts: 70
Likes: 0
Joined: Apr 24, 2013 16:58:15 GMT -5
|
Post by justputtnaround on May 26, 2013 8:44:25 GMT -5
If I order new jets should I order more then just the main jet? ?
|
|
